Black PVD steel hinged segment ring

Hypoallergenic black PVD coated surgical steel hinged segment rings in 0.8mm, 1mm and 1.2mm gauge (thickness) with 8mm, 10mm and 12mm internal diameters.

Hinged segment rings close the same way as standard segment rings but with one end hinged to the ring they aren't quite as fiddly as you only need to click one end into place. Often the segment does need to be guided into place. Holding the segment between your thumb and index finger and the ring part with your other hand is usually the easiest way to do this. Don't wory if it goes passed the ring instead of clicking in, it will go back into the right place without doing any harm.

Which size?
The sizes listed are for the internal diameter of the hinged segment rings so if you measure out from your piercing you should get a good idea of how each size would sit.

0.8mm, 1mm or 1.2mm gauge?
0.8mm/20 gauge (the same thickness as Blomdahl titanium and Studex Sensitive earrings) or 1mm/18 gauge hinged segment rings are good if your piercings have shrunk or were originally pierced with a smaller size. 1.2mm/16 gauge is the standard size ears are pierced with.
Please note: The hinged part is not thinner than the rest of the ring.